It is a learning code wireless remote control switch (receiver), the output way /working way can be changed as you like, it is easy to match the transmitter.
Output working way: 1. Self-lock: connect the JP1 with the cutting out cap.
2. Jog: the cutting-out cap is non-occupation, JP1 and JP2 do not connect either.
3. Inter-lock: Connect the Jp2 with the Cutting out cap.
Jog: press one button is ON, loosen your finger on the same button is OFF (need one channel switch and one buttons remote control).
Self -lock: press one button for one time is ON, press the same button again is OFF (need one channel switch and one buttons remote control).
Inter-lock: press one button is ON, press another button is OFF (need one channel switch and 2 buttons remote control).
Using Instructions: 1. Press the learning code, the indicator flash, loosen finger, press any button of the remote control, the indicator flash 2 times and off, it means learning successfully.
2. It can learn various chips with the different code wireless remote control.
3. Remove/clean: press the learning button about 8 seconds , the indicator turn on to off, it means that it has been removed.
Receiver: Size: 7.2 x 5.2 x 2.6cm
1. Working voltage: DC12V
2. Quiescent condition: Less than 6mA
3. Working temperature: -40 Degree +80 Degree
4. Receiver sensitivity: more than -105dBm
5. Working frequency: 433mhz
6. Output voltage: DC and AC is optional
7. Output current: Less than 3A
8. Max load current: 10A
Remote control transmitter: Size: 5.8 x 3.9 x 1.4cm
1. Remote Distance: 328ft/100M
2. Operating Voltage: DC 12V
3. Frequency: 433mhz
4. Operating Current: 13 mAh
5. Code Type: Fixed code / Learning code
Package Included: 2 x Transmitters
1 x Receiver
1 x Manual
Now you can buy Books online in USA,UK, India and more than 100 countries.
*Terms and Conditions apply
Disclaimer: All product data on this page belongs to
.
No
guarantees are made as to accuracy of prices and information.