2 Pack - Solidremote 433MHz Secure Rolling Code Remotes with FCC ID (TX-134) - Compatible with KIT-1 & KIT-2 /

Pack of 2pcs x TX-134 dual-mode RF transmitter in the box

#

TX-134 is a 433MHz rolling code remote control designed to work with both Solidremote 202U & 402U receivers * Switchable between two modes, NOT at the same time. NOT compatible with other receivers.

Please refer to receiver's manual (such as 202U's manual included in KIT-1 or 402U's manual included in KIT-2) for programming instructions. NO manual is included in this package.

By default, TX-134 is set to work with 202U. Please refer to Product Images > Change Operating Mode to see how to change working mode to 402U.

#

It's more secure than other fixed code, or so called learning code remotes on market, because the RF code changes every time after button is pressed. In addition, with over 18 quintillion (1.8 x 10^19) codes in traditional mode / over 87 duodecillion (8.7 x 10^40) codes in TrioAES mode, the chances of ever repeating a code are virtually non-existent.

Thanks to latest highly integrated RF chip, our remote works more stable and performs better than most similar remotes using old technology.

LED indicator illuminates when transmitting, also it will show faster flashing when battery needs to be replaced.

Typical battery life is 2 years under average operating conditions when using Energizer, Sony, Duracell, Panasonic, Maxell or similar brands. Not applicable to factory pre-installed battery, which is provided for trial purpose only.

# When opening remote control case to change battery or switch working mode, the recommended method is to use a utility knife or cutter knife to pry each side starting from center of the chain loop, be careful with sharp blade when doing this.