Features: 1. A good quality pre-wired control panel assembly for a telecaster type guitar
2. The panel is 160 x 32mm and is fitted with a three way pickup seletor switch, volume and tone controls with metal knobs
3. The 3 position switch allow switching between neck pickup, bridge pickup or both. The suggested switch wiring is shown in the diagram below
4. The circuit consists of a 250kOhm type B volume control pot and a 250kOhm type A tone control pot which uses a 47nF capacitor to ground
The following connections are required: - Connect the neck pickup core to switch pins 1 and 2
- Connect the bridge pickup core to switch pins 6 and 7
- Connect the flying lead core and screen to the jack socket
- Connect the bridge and neck pickup screens to the potentiomete cases (ground)
Pakcage Included:1 x Guitar Panel Direct Control Plate
Now you can buy Books online in USA,UK, India and more than 100 countries.
*Terms and Conditions apply
Disclaimer: All product data on this page belongs to
![buy amazon](/but/amazonsearchbox-logo.gif)
.
No
guarantees are made as to accuracy of prices and information.