OVERTURE PLA Filament 1.75mm with 3D Build Surface 200mm × 200mm 3D Printer Consumables, 1kg Spool (2.2lbs), Dimensional Accuracy +/- 0.05 mm, Fit Most FDM Printer, Black /

Description:

These 1.75mm PLA filaments are made of premium PLA material (Polylactic Acid), which boasts complete biodegradation and lower melting temperature, even does not need a heated bed, eco-friendly and safe, with no odor during the printing

Buy with Confidence, 100% Satisfaction Guarantee. E-mail us if you have any issues or questions, we will make every effort to provide you with immediate help until you are satisfied.

FAQs:

Why can't the filaments stick to the build bed?

1. Check the temperature setting before printing, PLA filaments have lower extrusion temperature;

2. Check if the plate surface has been used for a long time, it is recommended to replace it with our new one to ensure an strong first layer adhesion;

3. If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

4. If the effect is not good, it is recommended to try printing the draft before printing.

Specification:

Temperature

Recommended Extrusion/Nozzle Temp:  190°C - 220°C (374℉~ 428℉)，

Heated Bed Temp:  25°C - 60°C (77℉~ 140℉)

Filaments Diameter and Accuracy: 1.75 mm +/- 0.05

Filaments Net Weight: 1 kg (2.2 lbs)

Packaging Included:

1 × spool of PLA filaments

1 × build surface