2 Pack Smart Dimmer Switch for Dimmable LED Lights, WiFi Light Switch Compatible with Alexa and Google Home, Single Pole Only, Smart Life APP, Neutral Wire Required - White /

Install and Connect the Smart Switch to Wifi

STEP 1: Install the Smart Dimmer Switch

You need 3 wires (NOT INCLUDE THE GROUND WIRE) to install this switch, if you have only 2 wires, Please take a photo about your electrical box and mail to us for a technical support

-> The white wire(neutral wire) from your smart switch to the group of white wires(neutral wire) in the box.

-> Add green wire from your smart switch to the group of Ground wires in the box(Recommended but not required).

-> Find out which wire goes to the lights and attach it to the brown wire(load wire) from this smart switch.

-> Attach the hot wire in the wall box to the black wire(live wire) from your new switch.

STEP 2: Check Whether the Wiring is Correct (IMPORTANT FOR NEXT STEP)

-> Manually turn on/off and Dim/Brighten the lights normally, the wiring is ok.

-> The switch can't work well, Go back STEP 1 to check the wiring or mail to us for a technical support.

STEP 3: Connect the Smart Switch to Wifi

-> Make sure the router and your phone are all on the 2.4Ghz channel.

-> Login the "Smart Life - Smart Living" App with your account.

-> Click"+" in the top right corner of app.

->Click "Wall Switch"(not "Wall Switch (bluetooth)" or "Wall Switch(ZigBee)" ) in Electrical Category.

-> Follow the app instructions to complete the addition